Based on over 25 years of filter holder experience, extensive customer feedback and product testing, the LEE100 Filter Holder has been developed to make the experience of using filters quicker and...

The LEE100 Polariser is thin and lightweight, designed to make attaching and using a polarising filter quick and simple. Constructed using a new lightweight, high-transmission polariser glass, with a subtle...

A LEE100 58mm adaptor ring for non-wide angle lenses. For lenses 28mm and wider (FF equivalent), you will require a wide angle adaptor ring.

A LEE100 52mm adaptor ring for non-wide angle lenses. For lenses 28mm and wider (FF equivalent), you will require a wide angle adaptor ring.

A LEE100 55mm adaptor ring for non-wide angle lenses. For lenses 28mm and wider (FF equivalent), you will require a wide angle adaptor ring.

 LEE100 slot-in circular polarising filter 100mmx100mm, to cut through reflections and control light. Also compatible with the Nikon NIKKOR Z 14-24mm f2.8 S Holder kit when inserted into a Standard Filter Frame.

Original LEE Filters 105mm Circular Polariser screw-in is designed for the 100mm Foundation kit holder, 105mm Front holder Accessory ring is required to attach it - found here. This filter can...

The Coral Set – which ranges in strength from pale to mid tone – has a variety of uses. When placed across the sky, a warm, soft orange hue is...

LEE100 Low Contrast filters have a slight white opacity and are designed to lower the contrast by lightening dark areas. Size; 100mm x 100mm  

The primary colours of red, green and blue form the basis of the Pop Set. Like a more intense version of the Colour Grad Set, it can be used creatively to...

For a more subtle effect the Twilight Set contains a paler, thinner version of LEE Filter’s Coral Stripe filter. It is teamed with a Mahogany 3 Grad, which gives an...

The Pale Tint Set features colour filters is the palest of its range. The colours in this set allow the photographer to introduce the subtlest hints of tone to selected...

The LEE100 Fog 5 filter is perfect for an opaque, misty effect, which is different from soft focus. This filter is 100mm x 100mm

Original LEE Filters 105mm Linear Polariser screw-in is designed for the 100mm Foundation Kit Holder, also requires 105mm Front holder Accessory Ring to attach it - found here. This filter can...

  A set of 3 Neutral Density Graduated filters for the LEE100 system, with a Very Hard edge transition. Ideal for seascapes and any images with a very definite, flat horizon. Filter...

The LEE100 Fog 1 filter is perfect for an opaque, misty effect, which is different from soft focus. This filter is 100mm x 100mm

Resin Filters for the LEE100 System, available as a standard filter or with a hard or soft edge. Our Yellow filters can be used to creatively to introduce colour into...

Resin Filters for the LEE100 System, available as a standard filter or with a hard or soft edge. Our Pop Green filters can be used to creatively to introduce colour...

Resin Filters for the LEE100 System, available as a graduated filter with a hard or soft edge. Our Pop Blue filters can be used to creatively to introduce colour into...

Resin Filters for the LEE100 System, available as a standard filter or with a hard or soft edge. Our Pop Red filters can be used to creatively to introduce colour...

Designed for use with the LEE100 system, combinations are the secret weapon of the filter user in the know.  They are graduated filters with a different colour at each end...