Based on over 25 years of filter holder experience, extensive customer feedback and product testing, the LEE100 Filter Holder has been developed to make the experience of using filters quicker and more...

The LEE100 Polariser is thin and lightweight, designed to make attaching and using a polarising filter quick and simple. Constructed using a new lightweight, high-transmission polariser glass, with a subtle...

Adaptor Rings are a simple but important element of the LEE System, enabling the same holder and filters to be used with different lenses. Simply screw it onto the lens...

The Landscape Kit is an excellent starting point for landscape photography, with a filter holder and one filter. The Landscape Kit contains both the new LEE100 Holder and the most useful first...

Your filters will always be at your fingertips, thanks to a design that features three strap options: an over-the-shoulder strap, a belt loop, or a tripod strap. Holding up to...

Adaptor Rings are a simple but important element of the LEE System, enabling the same holder and filters to be used with different lenses. Simply screw it onto the lens...

A LEE100 77mm adaptor ring for non-wide angle lenses. For lenses 28mm and wider (FF equivalent), you will require a wide angle adaptor ring.

Your filters will always be at your fingertips, thanks to a design that features three strap options: an over-the-shoulder strap, a belt loop, or a tripod strap. Holding up to...

The Big Stopper is a long exposure filter that reduces the amount of light entering your lens by ten stops. By greatly extending exposure times, the Big Stopper has the...

The Little Stopper is a Long Exposure filter that reduces the light entering your lens by six stops. It is ideal for those low-light conditions at the beginning and end...

The Deluxe Kit is a comprehensive collection to give you total control in nearly all photographic situations. With 3 x ND grads, a Polariser and a Big Stopper, you have...

The Long Exposure Kit is everything you need for a perfect introduction to the addictive world of long exposure photography. It includes both the Little and Big Stoppers for complete exposure...

The LEE100 lens caps (100mm) allows you to leave the adaptor ring attached at all times while keeping the front element clean and safe. These caps are made of white...

Adaptor Rings are a simple but important element of the LEE System, enabling the same holder and filters to be used with different lenses. Simply screw it onto the lens...

Adaptor Rings are a simple but important element of the LEE System, enabling the same holder and filters to be used with different lenses. Simply screw it onto the lens...

Using an existing 105mm LEE Filters polariser with the new LEE100 Filter Holder is easy. Simply screw the filter into the new 105mm clip–on polariser ring and leave it in...

Adaptor Rings are a simple but important element of the LEE System, enabling the same holder and filters to be used with different lenses. Simply screw it onto the lens...

The filters in the LEE100 Mist Set are designed to imitate the effects of fog and mist, and are suitable for use either alone or in combination with one another...

The LEE100 0.6 (2 Stop) Neutral Density Medium Grad has a moderate gradation between the dark and clear areas of the filter. This allows the photographer to selectively adjust exposure...

A  LEE100 49mm adaptor ring for non-wide angle lenses. For lenses 28mm and wider (FF equivalent), you will require a wide angle adaptor ring.

The LEE100 0.9 (3 Stop) Neutral Density Medium Grad has a moderate gradation between the dark and clear areas of the filter. This allows the photographer to selectively adjust exposure...

The LEE100 Tandem Adaptor allows two LEE100 holders to be joined together and rotate independently from each other.Joining two holders together allows photographers to independently rotate each holder. This means...

Adaptor Rings are a simple but important element of the LEE System, enabling the same holder and filters to be used with different lenses. Simply screw it onto the lens...

A LEE100 67mm adaptor ring for non-wide angle lenses. For lenses 28mm and wider (FF equivalent), you will require a wide angle adaptor ring.

A LEE100 52mm adaptor ring for non-wide angle lenses. For lenses 28mm and wider (FF equivalent), you will require a wide angle adaptor ring.

The LEE100 ProGlass IRND (4 Stop) sets a whole new standard in high quality glass neutral density filters. These filters are remarkably neutral, with virtually no colour shift and extremely...

A LEE100 58mm adaptor ring for non-wide angle lenses. For lenses 28mm and wider (FF equivalent), you will require a wide angle adaptor ring.

A set of 3 Neutral Density Graduated filters for the LEE100 system, with a Medium edge transition. The perfect all-rounders for general landscape photography, these Medium edge grads will improve your images...

The LEE100 0.9 (3 Stop) Neutral Density Hard Grad has a tight gradation between the dark and clear areas of the filter. This allows the photographer to selectively adjust exposure...

The LEE100 Hood is a self-supporting lens hood, enabling photographers and videographers to shade the lens from glare and direct or off-angle light. Working intuitively with the LEE100 Holder, the LEE100...

This is a special LEE100 System adaptor ring for Nikon PC NIKKOR 19mm f/4E ED Tilt-Shift lens. This ring has been specifically designed to fit this popular lens. The adaptor...

Adaptor Rings are a simple but important element of the LEE System, enabling the same holder and filters to be used with different lenses. Simply screw it onto the lens...

A LEE100 72mm adaptor ring for non-wide angle lenses. For lenses 28mm and wider (FF equivalent), you will require a wide angle adaptor ring.

The Super Stopper is a long exposure filter that reduces the light entering your lens by 15 stops. It gives the photographer an opportunity to shoot during the middle of...

The LEE100 ProGlass IRND (3 Stop) sets a whole new standard in high quality glass neutral density filters. These filters are remarkably neutral, with virtually no colour shift and extremely...

The LEE100 Stopper Tin is a handy storage case with a foam lining to keep your LEE Filters Stopper safe and secure.

The LEE100 ProGlass IRND (6 Stop) sets a whole new standard in high quality glass neutral density filters. These filters are remarkably neutral, with virtually no colour shift and extremely...

The LEE100 Reverse 0.9 (3 stop) Neutral Density Grad has been specifically designed to give photographers full control over images shot at the beginning and end of the day. They...

Adaptor Rings are a simple but important element of the LEE System, enabling the same holder and filters to be used with different lenses. Simply screw it onto the lens...

A LEE100 82mm adaptor ring for non-wide angle lenses. For lenses 28mm and wider (FF equivalent), you will require a wide angle adaptor ring.

A LEE100 62mm adaptor ring for non-wide angle lenses. For lenses 28mm and wider (FF equivalent), you will require a wide angle adaptor ring.

A set of 3 Neutral Density Graduated filters for the LEE100 system, with a hard edge transition. Ideal for photography where you have a definite horizon and some sky in...

A set of 3 Neutral Density Graduated filters for the LEE100 system, with a Soft edge transition. Ideal for photography under canopies in woodland or where you have no definite horizon. Filter...

Original LEE Filters 105mm Circular Polariser screw-in is designed for the 100mm Foundation kit holder, 105mm Front holder Accessory ring is required to attach it - found here. This filter can...

The LEE100 ProGlass IRND (10 Stop) sets a whole new standard in high quality glass neutral density filters. These filters are remarkably neutral, with virtually no colour shift and extremely...

The LEE100 0.6 (2 Stop) Neutral Density Hard Grad has a tight gradation between the dark and clear areas of the filter. This allows the photographer to selectively adjust exposure...

The LEE100 0.9 (3 Stop) Neutral Density Soft Grad has a smooth gradation between the dark and clear areas of the filter. This allows the photographer to selectively adjust exposure...

A LEE100 55mm adaptor ring for non-wide angle lenses. For lenses 28mm and wider (FF equivalent), you will require a wide angle adaptor ring.

The 105mm Accessory Ring from LEE Filters will mount on the front of the LEE Foundation Kit (100mm filter holder) and allows the use of 105mm threaded accessories such as the 105mm Circular...

Original LEE Filters 105mm Linear Polariser screw-in is designed for the 100mm Foundation Kit Holder, also requires 105mm Front holder Accessory Ring to attach it - found here. This filter can...

The LEE100 ProGlass IRND (2 Stop) sets a whole new standard in high quality glass neutral density filters. These filters are remarkably neutral, with virtually no colour shift and extremely...

The LEE100 1.2 (4 Stop) Neutral Density Medium Grad has a moderate gradation between the dark and clear areas of the filter. This allows the photographer to selectively adjust exposure across...

The Coral Set – which ranges in strength from pale to mid tone – has a variety of uses. When placed across the sky, a warm, soft orange hue is...

The Autumn Tint Set makes the most of the rich golds, reds and browns that typify the Autumn season. A unique feature of these filters is that they can be...

The LEE Filters Spares Pack provides spare filter blocks and removal tool for the LEE85 and LEE100 Holder, along with a handy storage pouch. Included in this comprehensive pack is:...

The popular LEE100 Sunset Set adds warmth and definition to both sky and landscape, enhancing the natural colours created by sunsets. This set include 3 filters: Sunset Yellow - the...

The LEE100 ProGlass IRND (15 Stop) sets a whole new standard in high quality glass neutral density filters. These filters are remarkably neutral, with virtually no colour shift and extremely...

The LEE100 0.6 (2 Stop) Neutral Density Standard reduces the exposure equally across the frame. This increases shutter speeds, blurs movement and allows for effects that can't be produced any...

The LEE100 0.3 (1 Stop) Neutral Density Medium Grad has a moderate gradation between the dark and clear areas of the filter. This allows the photographer to selectively adjust exposure...

The LEE100 0.6 (2 Stop) Neutral Density Soft Grad has a smooth gradation between the dark and clear areas of the filter. This allows the photographer to selectively adjust exposure...

Adaptor Rings are a simple but important element of the LEE System, enabling the same holder and filters to be used with different lenses. Simply screw it onto the lens...

This special adaptor ring allows you to fix the LEE100 filter holder to the Canon 17mm TS-E lens. This ring has been specifically designed to fit this popular tilt and shift...

A LEE100 86mm adaptor ring for non-wide angle lenses. For lenses 28mm and wider (FF equivalent), you will require a wide angle adaptor ring.

A set of 3 Neutral Density Graduated filters for the LEE100 system, with a Very Hard edge transition. Ideal for seascapes and any images with a very definite, flat horizon. Filter strengths...

Original LEE Filters 105mm Landscape Polariser screw-in is designed for the 100mm Foundation kit holder, 105mm Front holder Accessory ring is required to attach it - found here. This filter...

The LEE100 0.45 (1.5 Stop) Neutral Density Standard reduces the exposure equally across the frame. This increases shutter speeds, blurs movement and allows for effects that can't be produced any...

A LEE100 105mm adaptor ring for non-wide angle lenses. For lenses 28mm and wider (FF equivalent), you will require a wide angle adaptor ring.

For a more subtle effect the Twilight Set contains a paler, thinner version of LEE Filter’s Coral Stripe filter. It is teamed with a Mahogany 3 Grad, which gives an...

Lifeless skies in both land and seascapes can be enhanced with the subtle use of this Sky Blue Set. Each filter increases slightly in intensity. Included in this set are:...

The purpose of the LEE100 Sky Set is to enhance the colours in the sky, and is particularly useful when a sunrise or sunset hasn’t quite lived up to expectations....

The LEE100 0.9 (3 Stop) Neutral Density Standard reduces the exposure equally across the frame. This increases shutter speeds, blurs movement and allows for effects that can't be produced any...

The LEE100 Reverse 0.6 (2 stop) Neutral Density Grad has been specifically designed to give photographers full control over images shot at the beginning and end of the day. They...

The LEE100 0.3 (1 Stop) Neutral Density Hard Grad has a tight gradation between the dark and clear areas of the filter. This allows the photographer to selectively adjust exposure...

The LEE100 0.3 (1 Stop) Neutral Density Soft Grad has a smooth gradation between the dark and clear areas of the filter. This allows the photographer to selectively adjust exposure...

The Solar Eclipse Filter brings the exposure range down to manageable levels when shooting solar events. SAFETY INFORMATION - NEVER look directly at the sun, even through the filter. A solar eclipse...

This is a special LEE100 System adaptor ring for Olympus 7-14mm Pro f2.8 ultra-wide zoom lens. This ring has been specifically designed to fit this popular lens. The adaptor consists of a...

Adaptor Rings are a simple but important element of the LEE System, enabling the same holder and filters to be used with different lenses. Simply screw it onto the lens...

Adaptor Rings are a simple but important element of the LEE System, enabling the same holder and filters to be used with different lenses. Simply screw it onto the lens...

This LEE100 82mm wide angle adaptor ring has an extended thread to specifically fit the Fuji GF23mm, which will not take the normal 82mm wide ring. It can also be...